Serious performance
Morel takes sound in the car seriously, and a great midrange speaker is crucial to a satisfying system. This Hybrid MW6 MKII 6-1/2" damped polymer woofer, powered by ferrite and neodymium magnets, handles the lower and midrange frequencies, benefitting massively from its sturdy one-piece dustcup structure. Plus, Morel uses new Hexatech aluminum voice coil technology for better heat dispersion and efficient performance.
Use it as part of a 2- or 3-way component system, and add a subwoofer for serious bass reinforcement. Just be sure you power it with an outboard amplifier to make the most of Morel's superior speaker technology.
Product highlights:
- 6-1/2" car woofers (pair)
- one-piece damped polymer woofer cone (DPC) with butyl rubber surround
- handles up to 140 watts RMS (600 watts peak power)
- frequency range: 35-3,000 Hz
- sensitivity: 91 dB
- top-mount depth: 2-7/16"
- cutout diameter: 5-1/2"
- warranty: 2 years
- MFR # 321126-425
- Item # 210HYBMW6M
- California customers: Please click here for your Proposition 65 WARNING.
What's in the box:
Morel Hybrid MW6 MKII owner's manual
- Two MW6mkII Woofers
- 2 Grilles
- Eight 1-1/4" Screws
- 8 Speed clips
- Grille putty
- Four 0.25" Crimp-on female quick slides
- Installation guide
- Warranty card
- Genuine product verification instructions
Features & specs
| General | ||
|---|---|---|
| Speaker Size | 6 1/2 | |
| Design | 1-way | |
| Tweeter Design | --- | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | --- | |
| Woofer Composition | Damped Polymer | |
| Woofer Surround | Rubber | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | N/A | |
| Sensitivity at 2.83 volts | 91 | |
| Frequency Response | 35 - 3k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 140 | |
| Peak Power Handling (Watts) | 600 | |
| Top-mount Depth (Inches) | 2 7/16 | |
| Bottom-mount Depth (Inches) | 2 11/16 | |
| Cutout Diameter or Length (inches) | 5 1/2 | |
| Mounting Height (Inches) | 0.403 | |
| Frame Width | 6.523 | |
| Frame Length | 6.523 | |
Product Research
Features
Size Classification Note: Some manufacturers, including Morel, call this size woofer a 6½". Because it requires a larger cutout than a standard 6½" speaker, Crutchfield has traditionally referred to this size woofer as 6¾". Please enter your vehicle information to confirm fit.
Controlled Acoustic Resistance: Car speakers are typically installed in free-air applications, providing minimal acoustic loading. Controlled Acoustic Resistance (C.A.R. Filter) improves the acoustic loading by controlling airflow within the driver, mimicking the effects of an enclosure. This provides greater control over the woofer's cone movement for improved bass dynamics.
Crossover: These drivers do not include a crossover, so you'll need to add one to the system if it's not built into your amplifier.
Whatsapp us!