Hybrid magic
Treat yourself to the rarified driving experience that Morel car speakers allow and rediscover what it feels like to love your music. The Hybrid 52 component speaker system gets its name from the ferrite and neodymium magnets that power the 5-1/4" damped polymer woofer. The woofer benefits massively from its sturdy one-piece dustcap and diaphragm structure, and Morel uses new Hexatech aluminum voice coil technology for better heat dispersion and efficient performance.
Signature highs
Morel's Hybrid Series component speakers are celebrated for their reliability and signature sound. The MT300 soft dome tweeter, coated with an Acuflex™ compound for supreme damping, helps define this speaker system with its warm highs. This system's external MXR crossovers help serve up the ideal blend of the highs and lows for an incredible stereo image. Plus, two levels of tweeter control let you dial in the sound to your car's environment. And Morel includes their famous Lotus-pattern grilles for an elegant look if you need to surface-mount these tweeters.
Product highlights:
- 5-1/4" component speaker system
- includes two woofers, two tweeters, and two crossovers
- one-piece Damped Polymer Cone (DPC)
- cast aluminum basket
- Acuflex coated silk dome tweeter
- external crossover with two tweeter level settings
- handles up to 120 watts RMS (500 watts peak power)
- frequency response: 45-25,000 Hz
- sensitivity: 90 dB at 2.83 V
- tweeter mounting depth: 1/2"
- woofer mounting depth: 2-7/16"
- woofer cutout diameter: 4-13/16"
- grilles included
- warranty: 2 years
- MFR # 350395-105
- Item # 210HYB52
- California customers: Please click here for your Proposition 65 WARNING.
What's in the box:
Morel Hybrid 52 owner's manual
- Two MW5mkII Woofers
- Two MT300 Tweeters (with attached 7" length of speaker wire)
- 2 MXR240.4 Crossovers
- 2 Woofer grilles
- 2 Flush mount tweeter housings (with tweeters installed)
- 2 Flush mount brackets
- 2 Angled surface mount tweeter housings
- Six 3/4" Screws
- Four 1" Screws
- Eight 1-1/4" Screws
- 8 Speed clips
- Installation guide
Features & specs
General | ||
---|---|---|
Speaker Size | 5 1/4 | |
Design | 2-way | |
Tweeter Design | 28mm Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk | |
Woofer Composition | Damped Polymer | |
Woofer Surround | Rubber | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 90 | |
Frequency Response | 45 - 25k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 120 | |
Peak Power Handling (Watts) | 500 | |
Top-mount Depth (Inches) | 2 7/16 | |
Bottom-mount Depth (Inches) | 2 9/16 | |
Cutout Diameter or Length (inches) | 4 13/16 | |
Mounting Height (Inches) | 0.337 | |
Frame Width | 5.212 | |
Frame Length | 5.212 |
Product Research
Features
Controlled Acoustic Resistance: Car speakers are typically installed in free-air applications, providing minimal acoustic loading. Controlled Acoustic Resistance (C.A.R. Filter) improves the acoustic loading by controlling airflow within the driver, mimicking the effects of an enclosure. This provides greater control over the woofer's cone movement for improved bass dynamics.
Tweeter Mounting Options: The tweeter can be surface or flush mounted using the included adapters. The surface mount housing angles the tweeters at approximately 45°.
Tweeter Dimensions:
Flush Mount | Angled Surface Mount | |
---|---|---|
Mounting Height | 0.315" | 1.31" |
Mounting Depth | 0.75" | screw depth |
Cutout Diameter | 1.82" | N/A |
Frame Diameter | 2.2" | N/A |
Frame Width | N/A | 2.13" |
Frame Depth | N/A | 2.69" |
Crossover: The outboard crossovers have screw terminal inputs and outputs (0.315" wide). The crossover point is 2.2 kHz; the low pass slope is 18 dB/octave and the high pass slope is 12 dB/octave. A jumper inside each crossover allows you to adjust the tweeter output level; choose -2 dB, 0 dB, or +2 dB.
Crossover Dimensions:
- Width: 5.55"
- Height: 1.42"
- Depth: 4.19"