Features & specs
| General | ||
|---|---|---|
| Speaker Size | 6 1/2 | |
| Design | 3-way | |
| Tweeter Design | 28mm Dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | Silk | |
| Woofer Composition | Paper Composite | |
| Woofer Surround | Butyl Rubber | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | N/A | |
| Sensitivity at 2.83 volts | 88 | |
| Frequency Response | 55 - 22k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 140 | |
| Peak Power Handling (Watts) | 300 | |
| Top-mount Depth (Inches) | 2 1/2 | |
| Bottom-mount Depth (Inches) | N/A | |
| Cutout Diameter or Length (inches) | 5 3/8 | |
| Mounting Height (Inches) | 0.328 | |
| Frame Width | 6.3 | |
| Frame Length | 6.3 | |
Product Research
Features
Woofer Size Classification Note: Some manufacturers, including Morel, call this size woofer a 6-1/2". Because it requires a larger cutout than a standard 6-1/2" speaker, Crutchfield has traditionally referred to this size woofer as a 6-3/4". Please enter your vehicle information to confirm fit.
Midrange Size: The midrange drivers are not a standard size, approximately 3-1/2" diameter. They are top mounted and have these dimensions:
- Depth: 0.959"
- Mounting height: 0.347" (0.5" including grille)
- Flange height: 0.225"
- Cutout diameter: 2.95"
- Frame diameter: 3.505"
- Terminal Width: 0.25"
Tweeter Mounting Options: The tweeter can be surface or flush mounted using the included adapters. The large surface mount housing also uses the flush mount housing and angles the tweeters at approximately 45°. The small surface mounting housing angles the tweeters at approximately 20°.
Tweeter Dimensions:
| Flush Mount | Large Surface Mount | Small Surface Mount | |
|---|---|---|---|
| Mounting Height | 0.564" | 1.935" | 1.352" |
| Mounting Depth | 0.875" | screw depth | screw depth |
| Cutout Diameter | 1.938" | N/A | N/A |
| Frame Width | 2.205" | 2.328" | 1.920" |
| Frame Depth | 2.688" | 2.645" | 1.950" |
Crossover: The outboard crossovers have screw terminal inputs and outputs (0.275" wide). A jumper inside each crossover allows you to adjust the tweeter output level; choose -2 dB, 0 dB, or +2 dB. The woofers' low pass crossover is 12 dB/octave at 500 Hz. The midrange's high pass crossover is 18 dB/octave at 500 Hz and low pass is 12 dB/octave at 2.2 kHz. The tweeters' high pass crossover is 6 dB/octave at 2.2 kHz.
Crossover Dimensions:
- Width: 5.535"
- Height: 1.457"
- Depth: 4.17"
