Features & specs
| General | ||
|---|---|---|
| Speaker Size | 6 1/2 | |
| Design | 2-way | |
| Tweeter Design | Inverted Dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | Aluminum/Magnesium | |
| Woofer Composition | Slatefiber | |
| Woofer Surround | Butyl Rubber | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | N/A | |
| Sensitivity at 2.83 volts | 91 | |
| Frequency Response | 60 - 21k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 80 | |
| Peak Power Handling (Watts) | 160 | |
| Top-mount Depth (Inches) | 2 13/16 | |
| Bottom-mount Depth (Inches) | N/A | |
| Cutout Diameter or Length (inches) | 5 5/8 | |
| Mounting Height (Inches) | 0.367 | |
| Frame Width | 6.492 | |
| Frame Length | 6.492 | |
Product Research
Features
Woofer Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Phase Plug: The bullet-shaped phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the high frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.
Size Classification Note: Some manufacturers, including Focal, call this size woofer a 6½". Because it requires a larger cutout than a standard 6½" speaker, Crutchfield has traditionally referred to this size woofer as a 6¾". Please enter your vehicle information to confirm fit.
Inverted Dome Tweeter: The tweeter is an inverted aluminum dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.
Tweeter Mounting Options: The tweeters can be flush mounted or surface mounted. The included flush mount housing doubles as a low profile surface mount, and angled surface mount housings are included:
| Flush Mount | Low Profile Surface Mount | Angled Surface Mount | |
|---|---|---|---|
| Mounting Height | 0.3" | 0.965" | 2.125" |
| Mounting Depth | 0.67" | (screw depth) | (screw depth) |
| Frame Diameter | 1.964" | 1.964" | N/A |
| Cutout Diameter | 1.75" | N/A | N/A |
| Width | N/A | 1.964" | 1.97" |
| Surface Depth | N/A | 1.964" | 3.14" |
Crossovers: Individual crossovers are included for each woofer and each tweeter. The crossovers can be mounted separately, docked in pairs, or all four crossovers docked together and mounted as one unit. The crossover inputs and outputs are screw terminals and will accept bare wire or spade connectors up to 0.315" wide. Because the woofer and tweeter crossovers are separate, and have separate inputs, the system can be bi-amped. The woofer crossover slope is 6 dB/octave. The tweeter crossover slope is 12 dB/octave, and the tweeter output level has three settings, -3 dB, 0 dB, and +3 dB.
Crossover Dimensions:
- Length: 4"
- Height: 1¼"
-
Width:
- Individual: 2"
- Pair: 4"
- All four: 8"
Whatsapp us!