Features & specs
| General | ||
|---|---|---|
| Speaker Size | 6 1/2 | |
| Design | 2-way | |
| Tweeter Design | Inverted Dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | Aluminum/Magnesium | |
| Woofer Composition | Flax | |
| Woofer Surround | Butyl Rubber | |
| Parts Warranty | N | |
| Labor Warranty | 1 Year | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | N/A | |
| Sensitivity at 2.83 volts | 91.5 | |
| Frequency Response | 70 - 28k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 60 | |
| Peak Power Handling (Watts) | 120 | |
| Top-mount Depth (Inches) | 2 3/16 | |
| Bottom-mount Depth (Inches) | N/A | |
| Cutout Diameter or Length (inches) | 5 5/8 | |
| Mounting Height (Inches) | 0.457 | |
| Frame Width | 6.495 | |
| Frame Length | 6.495 | |
Product Research
Features
Woofer Size Classification: Some manufacturers, including Focal, call this size woofer a 6½". Because it requires a larger cutout than a standard 6½" speaker, Crutchfield has traditionally referred to this size woofer as a 6¾". Please enter your vehicle information to confirm fit.
Aluminum Basket: The woofers' cast aluminum baskets are rigid and non-magnetic.
Surround: Each woofer uses a butyl rubber surround, resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Tweeters: The tweeters have inverted Aluminum/Magnesium domes, producing a broad sound stage. They can be surface or flush mounted using the included adapters. The angled surface mount housings can be positioned at 25° or 45°.
Note: When flush mounted, the tweeters are pressure fit into the opening, with nothing holding them from behind, so the cutout diameter is very important.
Tweeter Dimensions:
| Flush Mount | Angled Surface Mount | |
|---|---|---|
| Mounting Height | 0.393" | 1.8" |
| Depth | 0.425" | (screw depth) |
| Frame Diameter | 2.046" | 2.07" x 2.15" |
| Cutout Diameter | 1.572" | N/A |
Crossovers: The input and output wires are attached to each crossover. The 12" input wires are not terminated (bare wire). Both the woofer and tweeter output wires are also 12" long; the woofer outputs are terminated with quick slides to easily attach to the woofers and the tweeter outputs are not terminated (bare wire). A switch inside each crossover lets you adjust the tweeter output level; choose -3 dB or 0 dB (flat). The crossovers use 2nd order high-pass and low-pass filters (12 dB/octave). The crossover point for both is 3 kHz.
Crossover Dimensions:
- Width: 2⅜"
- Height: 1⅛"
- Depth: 3⅜" (4⅞" including wires)
Whatsapp us!