Features & specs
General | ||
---|---|---|
Speaker Size | Vehicle-specific | |
Design | 2-way | |
Tweeter Design | Inverted dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Aluminum | |
Woofer Composition | Flax | |
Woofer Surround | Butyl Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 83.15 | |
Sensitivity at 2.83 volts | 87 | |
Frequency Response | 150 - 20k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 50 | |
Peak Power Handling (Watts) | 100 | |
Top-mount Depth (Inches) | N/A | |
Bottom-mount Depth (Inches) | 1 9/16 | |
Cutout Diameter or Length (inches) | 3 5/8 | |
Mounting Height (Inches) | --- | |
Frame Width | 3.988 | |
Frame Length | 3.988 |
Product Research
Features
Mounting: The IS MBZ 100 component speaker set is a direct replacement for the factory speakers in select Mercedes Benz vehicles. Both the woofers and tweeters are direct, snap-in replacements for the factory drivers. Please enter your vehicle information to confirm fit.
Wiring: Each component crossover's input and output wires have factory plugs, so no splicing is necessary; the factory woofer harness plugs into the new crossover input. The crossover's 16" tweeter output wire plugs into the 12" wire attached to the tweeter and the 8" woofer output wire plugs directly into the woofer frame. If this speaker system is powered by any amplifier without an active high-pass crossover (including the factory radio), the additional included in-line filter (labeled protection patch on the box) must be used between the crossover and woofer.
Crossovers Dimensions:
- Width: 2⅞" (4⅜" including wire)
- Height: 1"
- Length: 1½"