Power that'll fit anywhere
Focal's FDS 1.350 mono amp can send your subwoofer up to 350 watts RMS, filling your ride with the bass you love. And, at 8" long and 4" wide, this little compact brick of an amp can fit almost anywhere in a vehicle, even under most passenger seats. Focal uses premium components that ensure superior performance, so you'll hear clean, powerful bass.
High tech to make it sound good
You'll find plenty of controls to make your bass sound perfect, including a variable low-pass filter, switchable bass boost, and variable phase adjustment. Focal's Direct FET® Technology keeps the amp's aluminum chassis so cool, you can stack it with another FDS Series amp, like the 4-channel FDS 4.350, to power an entire system from one slick-looking power station.
Subwoofer Wiring Diagrams
To see sample wiring diagrams for all common subwoofer/amplifier combinations, check out this informative article.
Product highlights:
- compact mono subwoofer amplifier
- 210 watts RMS x 1 at 4 ohms
- 350 watts RMS x 1 at 2 ohms
- CTA-2006 compliant
- variable low-pass filter: 40-400 Hz
- switchable bass boost (0, 6,12 dB @ 50 Hz)
- phase adjustment: (0° to 180° continuous)
- frequency response: 10-400 Hz
Other Features:
- stackable aluminum chassis
- Class D — Direct FET® Technology for efficient heat dissipation
- RCA preamp inputs only
- wiring and hardware not included with amplifier
- 10-gauge power and ground leads recommended
- fuse rating: 15A x 2
- dimensions: 7-13/16"W x 1-11/16"H x 4-1/4"D
- warranty: 1 year
- MFR # FDS 1.350
- Item # 091FDS1350
What's in the box:
Focal FDS 1.350 owner's manual
- Mono subwoofer amplifier
- Four 15-amp ATM mini-blade fuses (2 installed/ 2 spare)
- 2 Terminal covers (installed)
- Four 2-1/8" Allen head screws (2.5mm)
- 2.5mm Allen wrench
- Seven 10-12 Gauge crimp-on spade connectors (four with red insulators and three with black insulators)
- User manual (English/ French)
- Caution sheet
Features & specs
Performance | ||
---|---|---|
RMS Power Output (Watts x Channels) | 210 x 1 |
|
Peak Power Output (Watts x Channels) | N/A | |
Power at 2 Ohms (Watts x Channels) | 350 x 1 | |
Power at 1 Ohm (Watts x Channels) | --- | |
Bridged Power (Watts x Channels) | N/A | |
Minimum Impedance Bridged | N/A | |
Minimum Impedance Unbridged | 2 | |
Minimum Impedance | 2 | |
Best Frequency Response | 10-400 Hz | |
THD at Rated RMS Power | 1% | |
Signal to Noise Ratio | --- | |
Input Voltage | 14.4v | |
Features | ||
Amplifier Class | D | |
Low-Pass Crossover Frequency | 40-400 Hz | |
Low-Pass Slope (dB/octave) | N/A | |
High-Pass Crossover Frequency | N/A | |
High-Pass Slope (dB/octave) | N/A | |
Bass Boost | 0, 6, 12 dB | |
Bass Boost Frequency | 50 Hz | |
Fan Cooled | No | |
Fuse Rating | 30 | |
Speaker Level Inputs | No | |
Preamp Outputs | No | |
Width (inches) | 7-7/8 | |
Height (inches) | 1-3/4 | |
Depth (inches) | 4-5/16 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |
Product Research
Features
CEA-2006 Compliant: CEA-2006 is a system of testing and measurement for mobile audio amplifiers. This voluntary standard advocates a uniform method for measuring an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring amplifier power uses a DC input voltage of 14.4 volts and the RMS power output is measured over a frequency range of 20 Hz to 20 kHz (for full range amplifiers), with 1% or less Total Harmonic Distortion plus noise (THD+N). Signal-to-Noise ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4 ohms. CEA-2006 standards allow consumers to compare car amplifiers and receivers under the same conditions (apples to apples).
CEA-2006 Specifications:
- Power Output: 210 watts RMS x 1 into 4Ω
Other Specifications:
- Power Output: 350 watts RMS x 1 into 2Ω
- THD: 0.05%
- Frequency Response: 10 Hz to 400 Hz
Stackable: All the FD series amps (FDS 2.350, FD 1.350, and FD 4.350) have the same footprint, and can be stacked on top of one another.
Controls:
- Gain: rotary gain control; continuously variable 0.2 to 5.0 volts
- Crossover Frequency: rotary control; the low pass crossover point is continuously variable from 40 Hz to 400 Hz; the crossover is always engaged (it cannot be bypassed)
- Bass Boost: three position switche; 0dB, +6dB, or +12dB; centered at 50 Hz
- Phase: rotary control; continuously adjustable from 0° to 180°
Connections:
- Power: The power and ground, and remote turn-on connections are 0.3" wide screw terminals. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Crimp-on spade connectors are included for all three terminals.
- Speaker Outputs: There are 0.3" wide screw terminal outputs for two subwoofers. The two sets of terminals are internally shorted together, so two subs can easily be wired in parallel. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Crimp-on spade connectors are included for the subwoofers.
- Line Level Input: There is a pair of line level stereo RCA input jacks. The amplifier does not accept speaker level inputs.